Chapter 1: General Data

Covers vehicle identification, required diagnostic tooling, harness/connector service, and the under-chassis reference points needed before any other service work.

1. General Vehicle Inspection — placeholder; source page had no recoverable procedural content (see OCR note in the file).
2. Vehicle Classification — XR (SOHC) vs VR (DOHC turbo) grade lines, engine/transmission/drivetrain breakdown.
3. Required Testing Equipment — MUT-II hand-held tester, ROM Pack handling, harness connection point.
4. Wiring Harness Connection Inspection & Removal — connector removal technique, harness/pin inspection, fusible link testing, relay/connector seating checks.
5. Vehicle Under-Chassis Inspection Points — under-chassis diagram overview (callout labels not recoverable from OCR — see note).
6. Vehicle Under-Chassis Oil & Fluids Inspection Points — transfer case, front diff, and rear diff oil filler plug locations.
7. Vehicle Jacking & Lift Points — front/rear notch points for jacking and hoist lifting.